An ISO 9001:2015 Certified Company
Tablets

DYDRONOS-10 in Solan

DYDROGESTRONE 10MG

DYDRONOS-10 — Tablets
10x1x10 Tablets MRP On Request Open full size

Product sheet as published in the UNOS Biotech catalogue.

Product summary

Dydrogesterone 10 mg, sealed strips of ten. Continuity counts for more than price in this segment — a course that starts on one brand cannot sensibly be switched halfway.

  • Composition: DYDROGESTRONE 10MG.
  • Trade pack: 10x1x10.
  • Available on third party manufacturing, PCD franchise and distribution against a valid drug licence.

Product specification

Brand nameDYDRONOS-10
CompositionDYDROGESTRONE 10MG
Packing10x1x10
Dosage formTablets
Product typeAllopathic
Therapeutic segment Tablets, Gynaecology
MRP On Request Printed MRP per pack. Net rate, PTR and PTS on enquiry.
Marketed byUNOS BIOTECH PVT. LTD., Panchkula, Haryana

Dydrogesterone 10 mg, 10x1x10 — individually sealed strips.

DYDRONOS-10 third party manufacturing and PCD franchise in Solan

DYDRONOS-10 sits in the Tablets block of the UNOS Biotech range. Composition is DYDROGESTRONE 10MG and the trade pack is 10x1x10. MRP is confirmed with the rate, because it is set against the pack you order. Buyers in Solan take it on franchise, on third party manufacturing under their own brand name, or as ordinary distribution — the product is the same on all three and only the paperwork differs.

What is in DYDRONOS-10

The composition line on DYDRONOS-10 reads DYDROGESTRONE 10MG and stops there.

Plain molecules are the gaps on most competing price lists, because combinations are cheaper to differentiate and easier to sell. The consequence shows up at the counter rather than on the sheet: the prescription that specified the plain molecule goes to whoever had it.

Pack and presentation

Tablets are the cheapest dosage form to pack and the easiest to get wrong. The two layouts that matter on a rate sheet are blister and alu-alu. Blister is clear PVC on the front with foil behind it, which lets a chemist see the tablet and lets moisture in slowly. Alu-alu is aluminium on both faces: opaque, more expensive, and a genuine barrier. A 10x10 box holds a hundred tablets, a 10x15 holds a hundred and fifty, and the second one always looks cheaper per unit on a comparison sheet while tying up half again as much money per box.

On DYDRONOS-10 the pack is 10x1x10. That is 10 tablets to a box.

At the trade counter

At the counter, tablets move in strips rather than boxes, so the retailer's working capital is spread thinly and reorders are frequent and small. A stockist who carries the strip sizes a prescriber actually writes turns stock faster than one carrying the cheapest box in the segment.

Tablets supply: the market as it is

Competition is narrower than in the commodity segments and continuity of supply matters more than the rate.

Availability of the exact strength and pack is usually what decides the account.

How to read a rate sheet on this product

Before comparing a rate on DYDRONOS-10 with anybody else's, put both quotations on the same basis. Per tablet rather than per box, because pack sizes differ. Against the printed MRP, because that is what PTR and PTS are built from. Ex-factory rather than landed, because freight is a real number and a quotation that has absorbed it has also hidden it.

A supplier who cannot state all four plainly is not necessarily expensive. They are just not yet comparable, and the gap usually closes in their favour or against it once they are.

Third party manufacturing of DYDRONOS-10 under your own brand

DYDRONOS-10 can be manufactured under your own brand name. You keep the brand, the trademark and the market; production, packing and the batch documentation are handled here.

On a third party manufacturing order, tablets are where the per-unit rate falls fastest with quantity, because the tooling and the changeover cost are spread over a bigger run. This is the form where asking for the rate at two quantities instead of one is worth the extra minute: the gap between a small trial batch and a proper run is usually wide enough to change the decision.

To open the enquiry, have the quantity, your drug licence and GST registration in the invoicing firm's name, and the trademark details for the name you intend to print. What comes back is a per-pack rate, the minimum order quantity for this molecule and pack, and a lead time.

MRP, PTR and PTS on DYDRONOS-10

No printed MRP is published for DYDRONOS-10 on this page: it is settled with the pack at the time of the order. The structure underneath it is the usual one.

What sits under the printed MRP is the chain every buyer is really asking about. PTS is what a stockist pays, PTR is what the chemist pays the stockist, and the net rate is what a franchise associate pays the company. The associate's margin is the gap between the net rate and PTS — before GST, and before freight to Solan.

Rates on this range are quoted ex-Chandigarh with freight extra at actuals, which is stated here so that a comparison with another quotation starts from the same baseline rather than from two different ones.

What to carry alongside DYDRONOS-10

Belongs alongside the rest of its therapeutic block on a price list.

Works best as part of a basket aimed at one chamber rather than as a standalone line.

Who orders DYDRONOS-10

Distributors filling a specific gap rather than building a general basket.

Associates with the relevant chamber in their territory, and the chemists around those practices.

Paperwork for an order of DYDRONOS-10

Whatever route you buy DYDRONOS-10 on, the paperwork is the same: a valid drug licence and a GST registration, both in the name of the firm that will appear on the invoice. A wholesale buyer usually holds Form 20B and 21B; what matters is that the licence covers the firm being billed, not an associated one.

For a third party manufacturing order there is a third document — the trademark registration or application for any brand name to be printed. That one is needed before artwork, not before dispatch, which gives it a longer runway but makes it easier to forget.

Who DYDRONOS-10 is for

A marketing company building its own brand. DYDRONOS-10 is available for third party manufacturing under your name, with the pack and artwork settled before the batch is scheduled.

A new franchise associate. Take DYDRONOS-10 as part of the Tablets block rather than on its own. A single product does not open a chamber; a segment does.

An established distributor. If you already carry this segment, the question is whether this exact composition and pack is a gap on your current sheet. More often than not it is, because gaps are rarely at the obvious strengths.

What UNOS Biotech actually certifies

UNOS BIOTECH PVT. LTD. is an ISO 9001:2015 certified company. That is the only certification claimed on this site, and it is worth being precise about what it is: a quality management system standard. It is not a facility approval, it is not a regulatory clearance, and it is not a substitute for either.

You will find Indian pharma sites claiming more than they hold — plant certifications nobody issued them, approvals from authorities that do not grant them to a marketing company at all. A buyer who checks finds out, and the supplier who made the claim has a harder conversation than the one who never did. Every consignment of DYDRONOS-10 travels with its batch documentation, which is the thing a buyer can actually verify.

Storage and transport to Solan

Tablets travel better than anything else in a pharma consignment. They do not leak, they do not settle, and a carton that arrives dented usually still has saleable stock inside it. What they do not tolerate is heat and damp together, which is the argument for alu-alu on anything hygroscopic and the reason a godown with a tin roof costs more in write-offs than it saves in rent.

Consignments move by surface from Chandigarh unless something else is agreed, and the packing is specified for that journey rather than for an ideal one.

Common questions from buyers

Are rates inclusive of freight and GST?

No. Rates are quoted ex-Chandigarh, freight extra at actuals, GST as applicable to the product category, payment in advance. A landed cost into Solan is the rate plus the freight.

What certification does the company hold?

ISO 9001:2015, and nothing beyond it. No other certification, facility approval or regulatory clearance is claimed anywhere on this site.

What is the minimum order quantity for DYDRONOS-10?

It depends on the pack and the artwork, and it is not the same figure as for a different dosage form. Send the quantity you have in mind and the minimum for this molecule and pack comes back with the rate.

Can I get DYDRONOS-10 without a drug licence?

No. A valid drug licence and a GST registration in the name of the firm being invoiced are required on every route — distribution, franchise and third party manufacturing alike.

What else is in the DYDRONOS range?

Several presentations share the stem. Ask for the family rate rather than the single-product rate; the quantity across the family is usually what moves a quotation.

How soon can a consignment reach Solan?

Lead time comes back with the rate, because it depends on the quantity, the artwork and whether a batch is scheduled. Transit after dispatch is by surface from Chandigarh.

What is the MRP on DYDRONOS-10?

MRP is confirmed with the rate, because it is set against the pack you order. Net rate, PTR and PTS are then worked against that figure.

Ask for a rate on DYDRONOS-10 in Solan

For rates on DYDRONOS-10 in Solan, send the quantity and your district. What comes back is the net rate against the printed MRP, the minimum order quantity for this pack and a lead time. If you are asking about a monopoly appointment, say which district and you will be told plainly whether it is open. Call 8264472179.

Ordering DYDRONOS-10 in Solan

Send the quantity you need against the pack shown above and we come back with the rate, the minimum order quantity and a lead time. Rates are quoted ex-Chandigarh, freight extra at actuals, GST as applicable to the product category, payment in advance. Expiry and breakage claims are not entertained, which is why the shelf life on the batch you are offered is worth asking about when you order rather than afterwards.

The three routes, and which one you want

  • Under your own brand. Any item here can be made as third party manufacturing — you keep the brand, the trademark and the market, and production, packing and batch documentation are handled here. This is the route for a marketing company that wants equity in a name of its own rather than in somebody else's.
  • On franchise. Appointments are district-wise, so two associates are never put into the same market. See PCD pharma franchise. This is the route for somebody building a territory: the promotional work you do in a chamber stays yours.
  • On distribution. Straight supply against a valid drug licence, with no exclusivity and no promotional commitment either way. The simplest of the three, and the right one for a wholesaler filling a gap on a sheet they already have.

What you need either way

Two documents decide whether an order can be invoiced at all, and they are the same two on all three routes: a valid drug licence in the name of the firm being invoiced — commonly Form 20B and 21B for a wholesaler — and GST registration in that same firm's name. The name on the licence and the name on the invoice have to match; an order held at dispatch is almost always held because they did not.

A third party manufacturing order needs one more: the trademark registration, or the application number, for any brand name you intend to print. That is needed before artwork rather than before dispatch, which gives it a longer runway and makes it easier to forget. Cartons, foils, labels and inserts are produced against artwork you approve before a batch is scheduled, not after it.

If you are applying for a licence now, that is a normal place to be starting from. The quotation can be worked out in the meantime — only the dispatch waits on the paperwork.

How the rate is built

Four terms carry every franchise conversation in this industry, and mixing them up is how two quotations get compared that were never comparable:

  • MRP — the maximum retail price printed on the pack. A retailer may sell below it and may not sell above it.
  • PTR — price to retailer: what the chemist pays the stockist.
  • PTS — price to stockist: what the stockist pays the company or the franchise associate.
  • Net rate — what an associate pays us. The gap between that and PTS is the associate's margin, before GST and before freight.

Those last four words matter more than anything else on this list. Two offers quoting the same PTS are not the same offer if one is ex-factory with freight at actuals and the other is landed at your godown. Before comparing anybody's rate with anybody else's, put both on the same basis: per tablet, bottle or tube rather than per box, since pack sizes differ; against the printed MRP, since the margins are built from it; and ex-factory rather than landed, since freight is a real number and a quotation that has absorbed it has also hidden it. The second thing worth checking is what quantity a rate assumes — a number for a full run and a number for a trial batch are both honest and they are not the same offer.

Monopoly rights, and what the word should mean

Franchise appointments are granted by district rather than by state or by city, and they cover the range rather than a single product. Both of those are deliberate. A monopoly on one line is not a territory — an associate who holds one finds the rest of the segment arriving in their market through somebody else. And the practical test of a monopoly is simple: if a company cannot tell you who else holds your district, it is not granting one.

Building a prescriber relationship takes months of visits. An associate who finds a second supplier's representative in the same waiting room has lost those months, which is the whole reason the appointment is written the way it is.

How a first order actually goes

It is shorter than most people expect, and the order of the steps matters because each one depends on the last:

  1. You send the list and the quantity. Product, pack, and how many. On a third party manufacturing enquiry, say whether you want the pack shown here or something else — it changes the tooling and therefore the rate.
  2. We send the rate, the minimum order quantity and a lead time. All three together, because a rate without a minimum is not an offer you can act on.
  3. Licence and GST are verified. Both in the name of the firm to be invoiced. This is where a first order stalls if the names do not match.
  4. Artwork, if it is your brand. Cartons, foils and labels go to proof and you approve them. Nothing is scheduled until you do.
  5. Payment, then dispatch. Payment in advance, goods ex-Chandigarh by surface, batch documentation travelling with the consignment.

Marketing company or manufacturer — why it matters to you

UNOS Biotech is a pharma marketing company. Products are manufactured at licensed third-party units and marketed under the UNOS Biotech name, or under yours. That is the normal structure for most of the PCD and franchise market in this country, and it is worth understanding rather than guessing at, because it tells you what questions are reasonable.

Reasonable: ask for the composition, the pack, the printed MRP, the batch documentation that travels with the goods, and the shelf life on what you are being offered. Not reasonable, and a warning sign when a supplier answers it anyway: asking a marketing company for a plant certification it does not hold. A company that will claim one it has not got will also claim a lead time it cannot meet.

Dispatch and documentation

Goods move by surface transport from Chandigarh unless something else is agreed, and the packing is specified for that journey rather than for an ideal one. Every consignment travels with its batch documentation. Composition, pack size and printed MRP are exactly as shown on this page — those are the details on the pack itself.

What this company does and does not claim

UNOS BIOTECH PVT. LTD. is an ISO 9001:2015 certified company. That is a quality management system standard, and it is the only certification claimed anywhere on this site. No plant certification, foreign regulatory approval or government endorsement is claimed, because none is held.

The restraint is deliberate and it protects everybody downstream. A distributor who repeats a certification their supplier invented is the one standing in front of the buyer when it gets checked. For anything clinical, what a product contains is stated on the pack, and how it should be used is a matter for a registered medical practitioner and the pack insert — not for a supplier's catalogue page.

Call 8264472179 with the quantity, your district and which of the three routes you are asking about, and the reply will be specific to that.

Business enquiry information

Third party manufacturing

This formulation can be produced under your own brand name and artwork.

Details →

PCD franchise

Available within a monopoly territory alongside the wider product basket.

Details →

Distribution

Available to appointed stockists against a valid drug licence and GST registration.

Details →

Questions about this product

DYDRONOS-10 contains DYDROGESTRONE 10MG. It is supplied as tablets. The composition is reproduced from the company price list and is not prescribing information.

DYDRONOS-10 is packed as 10x1x10. Net rate, PTR and PTS are shared against the printed MRP on enquiry.

Yes. DYDRONOS-10 can be included in a PCD franchise basket on district-wise monopoly rights, so two associates are never appointed into the same market. A valid drug licence and GST registration are required, and net rates, PTR, PTS and the minimum order quantity are shared before you commit.

Yes. This formulation is available for third party manufacturing under your own brand name and artwork. Rates are quoted ex-Chandigarh with freight extra at actuals and GST as applicable, and the minimum order quantity and lead time are confirmed in writing with the quotation.
Disclaimer. Product information provided on this website is for general informational and business enquiry purposes. Please consult a qualified healthcare professional for medical advice, diagnosis or treatment. Product details shown here are reproduced from the company price list and are not prescribing information.
Related

Other products in this segment

ETONOS-P — Tablets 10x10 ALU

ETORICOXIB 60MG + PARACETAMOL 325 MG

Packing: 10x10 ALU Segment: Tablets
MRP₹ 1,250.00
ETONOS-T4 — Tablets 10x10 ALU

ETORICOXIB 60MG + THIOCOLCHICOSIDE 4MG

Packing: 10x10 ALU Segment: Tablets
MRP₹ 2,400.00