UNODIC in Chennai
InjectionsDICLOFENAC SODIUM 75 MG AQUA
AMIKACIN SULPHATE 500 MG
Product sheet as published in the UNOS Biotech catalogue.
Amikacin sulphate 500 mg. The aminoglycoside here, and the cheapest of the injectable antibiotics.
| Brand name | AMINOS-500 |
|---|---|
| Composition | AMIKACIN SULPHATE 500 MG |
| Packing | 1 VIAL |
| Dosage form | Injections |
| Product type | Allopathic |
| Therapeutic segment | Injections, Anti-Infectives |
| MRP | ₹ 115.00 Printed MRP per pack. Net rate, PTR and PTS on enquiry. |
| Marketed by | UNOS BIOTECH PVT. LTD., Panchkula, Haryana |
Amikacin sulphate 500 mg injection, vial.
What AMINOS-500 is, in one line: AMIKACIN SULPHATE 500 MG, 1 VIAL. The printed MRP on the pack is ₹115.00. It is marketed by UNOS BIOTECH PVT. LTD. of Panchkula, Haryana, an ISO 9001:2015 certified company, and it is available to distributors, PCD franchise associates and own-brand marketing companies working Chennai.
One molecule, one strength: AMIKACIN SULPHATE 500 MG. AMINOS-500 carries nothing else, and a buyer comparing it against a combination on somebody else's rate sheet is not comparing like with like.
The composition on this page is the composition on the pack. Clinical questions belong with a registered medical practitioner and with the pack insert; this page covers what is supplied and on what terms.
The trade pack is 1 VIAL. That is the unit that is quoted, invoiced and shipped, so it is the unit to compare against anybody else's sheet.
Injectables are packed in vials or ampoules, boxed in small counts, and priced per unit rather than per strip. The pack is the smallest part of the cost and the most regulated part of the file.
One certification, stated once: ISO 9001:2015. Nothing else is claimed for the company or the product anywhere on this site, and nothing else should be read into the absence of a claim either.
On AMINOS-500 the verifiable facts are the composition, the pack and the printed MRP shown on this page — all three are what is on the pack itself — plus the batch documentation that travels with the goods. Anything a buyer cannot check is not a selling point; it is a risk they are being asked to carry.
AMINOS-500 carries a printed MRP of ₹115.00.
Underneath the printed figure the structure is the one every franchise conversation turns on:
Those last four words are where most rate comparisons go wrong. Two offers quoting the same PTS are not the same offer if one is ex-Chandigarh with freight at actuals and the other is landed.
PCD appointments on AMINOS-500 are district-wise. One associate per district for the range: two are never appointed into the same market, because a monopoly that is not actually exclusive is not worth the paper the agreement is printed on.
What that means in practice for an associate in Chennai is that the prescriber work you put in is yours. Building a chamber takes months, and an associate who finds a second supplier's man in the same waiting room has lost those months.
What it means for us is that a district has to be open before it can be offered. Ask about yours specifically rather than about the state; the answer is different district by district.
An established distributor. If you already carry this segment, the question is whether this exact composition and pack is a gap on your current sheet. More often than not it is, because gaps are rarely at the obvious strengths.
An institutional or hospital buyer. Larger quantities on different terms, with the documentation supplied before the rate rather than after it.
A new franchise associate. Take AMINOS-500 as part of the Injections block rather than on its own. A single product does not open a chamber; a segment does.
AMINOS-500 can be manufactured under your own brand name. You keep the brand, the trademark and the market; production, packing and the batch documentation are handled here.
This is the form where third party manufacturing conversations get specific quickly. Sterile manufacturing is a different licence, a different facility and a different minimum quantity from oral solids, and a quotation that prices an injection the way it would price a tablet order has not been worked out properly. Expect higher minimums and longer lead times, and expect them to be non-negotiable.
To open the enquiry, have the quantity, your drug licence and GST registration in the invoicing firm's name, and the trademark details for the name you intend to print. What comes back is a per-pack rate, the minimum order quantity for this molecule and pack, and a lead time.
Availability of the exact strength and pack is usually what decides the account.
Competition is narrower than in the commodity segments and continuity of supply matters more than the rate.
Whatever route you buy AMINOS-500 on, the paperwork is the same: a valid drug licence and a GST registration, both in the name of the firm that will appear on the invoice. A wholesale buyer usually holds Form 20B and 21B; what matters is that the licence covers the firm being billed, not an associated one.
For a third party manufacturing order there is a third document — the trademark registration or application for any brand name to be printed. That one is needed before artwork, not before dispatch, which gives it a longer runway but makes it easier to forget.
This product sits in a specialist corner of the list where volumes are modest and the writing is deliberate rather than routine.
A targeted line rather than a general one: it moves where the chamber for it exists and sits quietly where it does not.
AMINOS-500 is one of the Injections lines on this list. The others a buyer usually asks about in the same conversation:
A basket built from one segment is easier to sell into a chamber than a basket assembled across five, because the associate is having one conversation with one prescriber rather than five shallow ones.
Most buyers asking about AMINOS-500 are holding two or three other quotations. Four things make those numbers comparable, and a sheet missing any of them is not telling you what you will pay:
It depends on the pack and the artwork, and it is not the same figure as for a different dosage form. Send the quantity you have in mind and the minimum for this molecule and pack comes back with the rate.
No. That is the printed MRP on the pack. Net rate, PTR and PTS are worked against it and agreed at the time of the order.
No. Rates are quoted ex-Chandigarh, freight extra at actuals, GST as applicable to the product category, payment in advance. A landed cost into Chennai is the rate plus the freight.
ISO 9001:2015, and nothing beyond it. No other certification, facility approval or regulatory clearance is claimed anywhere on this site.
Lead time comes back with the rate, because it depends on the quantity, the artwork and whether a batch is scheduled. Transit after dispatch is by surface from Chandigarh.
Several presentations share the stem. Ask for the family rate rather than the single-product rate; the quantity across the family is usually what moves a quotation.
No. A valid drug licence and a GST registration in the name of the firm being invoiced are required on every route — distribution, franchise and third party manufacturing alike.
The fastest way to get a usable number on AMINOS-500 is to send three things: the quantity, your district in Chennai, and whether this is for distribution, for a franchise appointment or for your own brand. Rate, minimum order quantity and lead time come back against those. Call 8264472179 or use the enquiry form.
Send the quantity you need against the pack shown above and we come back with the rate, the minimum order quantity and a lead time. Rates are quoted ex-Chandigarh, freight extra at actuals, GST as applicable to the product category, payment in advance. Expiry and breakage claims are not entertained, which is why the shelf life on the batch you are offered is worth asking about when you order rather than afterwards.
Two documents decide whether an order can be invoiced at all, and they are the same two on all three routes: a valid drug licence in the name of the firm being invoiced — commonly Form 20B and 21B for a wholesaler — and GST registration in that same firm's name. The name on the licence and the name on the invoice have to match; an order held at dispatch is almost always held because they did not.
A third party manufacturing order needs one more: the trademark registration, or the application number, for any brand name you intend to print. That is needed before artwork rather than before dispatch, which gives it a longer runway and makes it easier to forget. Cartons, foils, labels and inserts are produced against artwork you approve before a batch is scheduled, not after it.
If you are applying for a licence now, that is a normal place to be starting from. The quotation can be worked out in the meantime — only the dispatch waits on the paperwork.
Four terms carry every franchise conversation in this industry, and mixing them up is how two quotations get compared that were never comparable:
Those last four words matter more than anything else on this list. Two offers quoting the same PTS are not the same offer if one is ex-factory with freight at actuals and the other is landed at your godown. Before comparing anybody's rate with anybody else's, put both on the same basis: per tablet, bottle or tube rather than per box, since pack sizes differ; against the printed MRP, since the margins are built from it; and ex-factory rather than landed, since freight is a real number and a quotation that has absorbed it has also hidden it. The second thing worth checking is what quantity a rate assumes — a number for a full run and a number for a trial batch are both honest and they are not the same offer.
Franchise appointments are granted by district rather than by state or by city, and they cover the range rather than a single product. Both of those are deliberate. A monopoly on one line is not a territory — an associate who holds one finds the rest of the segment arriving in their market through somebody else. And the practical test of a monopoly is simple: if a company cannot tell you who else holds your district, it is not granting one.
Building a prescriber relationship takes months of visits. An associate who finds a second supplier's representative in the same waiting room has lost those months, which is the whole reason the appointment is written the way it is.
It is shorter than most people expect, and the order of the steps matters because each one depends on the last:
UNOS Biotech is a pharma marketing company. Products are manufactured at licensed third-party units and marketed under the UNOS Biotech name, or under yours. That is the normal structure for most of the PCD and franchise market in this country, and it is worth understanding rather than guessing at, because it tells you what questions are reasonable.
Reasonable: ask for the composition, the pack, the printed MRP, the batch documentation that travels with the goods, and the shelf life on what you are being offered. Not reasonable, and a warning sign when a supplier answers it anyway: asking a marketing company for a plant certification it does not hold. A company that will claim one it has not got will also claim a lead time it cannot meet.
Goods move by surface transport from Chandigarh unless something else is agreed, and the packing is specified for that journey rather than for an ideal one. Every consignment travels with its batch documentation. Composition, pack size and printed MRP are exactly as shown on this page — those are the details on the pack itself.
UNOS BIOTECH PVT. LTD. is an ISO 9001:2015 certified company. That is a quality management system standard, and it is the only certification claimed anywhere on this site. No plant certification, foreign regulatory approval or government endorsement is claimed, because none is held.
The restraint is deliberate and it protects everybody downstream. A distributor who repeats a certification their supplier invented is the one standing in front of the buyer when it gets checked. For anything clinical, what a product contains is stated on the pack, and how it should be used is a matter for a registered medical practitioner and the pack insert — not for a supplier's catalogue page.
Call 8264472179 with the quantity, your district and which of the three routes you are asking about, and the reply will be specific to that.
DICLOFENAC SODIUM 75 MG AQUA
PANTOPRAZOLE 40MG
IRON SUCROSE
HYDROXYPROGESTERONE CAPROATE 500MG
Injections supplied across India. Every district below has a page of its own — the same range, the same terms, confirmed for that market.